Duesenberg Z-Tuner, Knurled Buttons

Al ver el vídeo, usted acepta que sus datos
sean transmitidos a YouTube y que ha leído la
política de privacidad.
Gracias.

No.Art. 0449N

93,00 €

Descripción
Nickel plated, 3-left/3-right. These tuners are used for the Duesenberg Doublecat 12-string and the Mandola 12-string. Instead of the usual wings, they have cylindrical knurled knobs, which allows space-saving assembly. Also, there is no need for a screw tab, as the position is fixed by two small pins on the inside. For 12-string headstocks, of course, two sets must be ordered! For 10mm machine head holes, ratio 18:1. Incl. sleeves.
- 3-left/3-right
- Required peghole: 10mm
- Ratio: 18:1
- String post lenght: 26mm
- Distance from baseplate to string hole: 21,2mm
- Weight per piece: 28g

Más información

Nickel plated, 3-left/3-right. These tuners are used for the Duesenberg Doublecat 12-string and the Mandola 12-string. Instead of the usual wings, they have cylindrical knurled knobs, which allows space-saving assembly. Also, there is no need for a screw tab, as the position is fixed by two small pins on the inside. For 12-string headstocks, of course, two sets must be ordered! For 10mm machine head holes, ratio 18:1. Incl. sleeves.

3-left/3-right
Required peghole: 10mm
Ratio: 18:1
String post lenght: 26mm
Distance from baseplate to string hole: 21,2mm
Weight per piece: 28g

❯ Hersteller und Sicherheitshinweise

Das Saitenende wird nach dem Durchziehen auf der Kopfplattenrückseite abgeschnitten (Saitenende danach wieder etwas in das Gehäuse zurückdrücken, damit man sich nicht am abgeschnittenen Ende piekst). Dann einfach weiterdrehen bis die Saite gestimmt ist.