Vahlbruch SpaceTime Echo V3
-
Description
The "SpaceTime" is a handmade echo pedal which combines the advantages of analog and digital circuits in a unique way. As a result it is a warm and deep sounding delay pedal, easy to operate and able to create beloved analog delay typical self-oscillations. Your direct (dry) guitar signal is completely preserved in the analog world - there is no latency for your straight guitar signal! In a carefully designed parallel digital signal path the generation of the echo signal is realized and finally added to the dry signal back in the analog world. The "SpaceTime" pedal has three control knobs to adjust your tone. The delay time is set by "Time", the number of echo repeats can be changed by "Repeats" and the volume of the echo signal can be adjusted with the "Mix-Level" knob. The "Mod" control allows smooth modulation of the delay time for added movement and texture. Additionally a toggle switch allows you to change the treble content of the echoed signal. Switching from "bright" to "mellow" to "dark" gradually reduces the top end - resulting in warm, deep and natural sounding echo. The straight (non delayed) guitar signal is not affected by this tone control! An internal DIP-switch allows you to select between "true bypass" or "buffered bypass" and a "kill-dry" mode. Thus, the "SpaceTime" can be optimally adapted to any signal chain.
The "SpaceTime" is a handmade echo pedal which combines the advantages of analog and digital circuits in a unique way. As a result it is a warm and deep sounding delay pedal, easy to operate and able to create beloved analog delay typical self-oscillations. Your direct (dry) guitar signal is completely preserved in the analog world - there is no latency for your straight guitar signal! In a carefully designed parallel digital signal path the generation of the echo signal is realized and finally added to the dry signal back in the analog world. The "SpaceTime" pedal has three control knobs to adjust your tone. The delay time is set by "Time", the number of echo repeats can be changed by "Repeats" and the volume of the echo signal can be adjusted with the "Mix-Level" knob. The "Mod" control allows smooth modulation of the delay time for added movement and texture. Additionally a toggle switch allows you to change the treble content of the echoed signal. Switching from "bright" to "mellow" to "dark" gradually reduces the top end - resulting in warm, deep and natural sounding echo. The straight (non delayed) guitar signal is not affected by this tone control! An internal DIP-switch allows you to select between "true bypass" or "buffered bypass" and a "kill-dry" mode. Thus, the "SpaceTime" can be optimally adapted to any signal chain.
❯ Hersteller und Sicherheitshinweise
Ausgestattet mit dem MagTraB-Schaltkonzept:
Alle Fußschalter sind als Taster ausgeführt. Im Tasterkopf ist ein Magnet eingearbeitet, dessen jeweilige Position von einem Sensor im Inneren des Gerätes erfasst wird. Wird der Taster nun bewegt, z.B. wenn er nach unten gedrückt wird, verändert sich natürlich auch die Position des Magneten. Diese Änderung misst der Sensor kontaktlos und gibt sie über einen Mikrocontroller an ein goldkontaktiertes Relais weiter, das dann ohne jegliche Zeitverzögerung den eigentlichen Schaltvorgang durchführt.
Die Vorteile der MagTraB-Technologie:
- MagTraB Taster sind so gut wie unzerstörbar! Sie liefern im Vergleich zu üblichen Fußschaltern eine nahezu unendliche Anzahl Schaltzyklen - viele, viele Millionen!!
- Kein störendes, mechanisches Schalterknacken! Vielmehr schaltet man mit den MagTraB-Tastern nahezu lautlos und mit einem sehr geschmeidigen Soft-touch-Schaltgefühl!
Soll das Gerät beim Einschalten sofort „on" sein oder im „bypass"?
Programmiere einfach um:
Schritt 1: Ziehe die Stromversorgung ab.
Schritt 2: Drücke und halte „MagTraB".
Schritt 3: Stecke die Stromversorgung wieder ein.
Schritt 4: Loslassen des „MagTraB" Schalters.
FERTIG! Beim nächsten Mal startet dein Pedal in dem anderen Zustand.
Technische Daten:
- Einzigartige MagTraB Schaltertechnologie!
- Interne Schalter für „true bypass" oder „buffered bypass"
- Regler für „Time", „Repeats" und „Mix-Level"
- "Mod" - Regler für stufenlose Modulation der Delay-Zeit
- Tone-Schalter für „bright", „mellow", „dark"
- Analoger direkter Signalweg mit sehr linearem Frequenzgang
- Besonders nebengeräuscharme Schaltung
- Verzögerungszeit max. 660 ms
- Eingangsimpedanz: 1.0M Ohm
- Ausgangsimpedanz: 1.0k Ohm
- Der Stromverbrauch beträgt 60 mA
- 9V Stromversorgung über externes Netzteil,
erforderliche Polung: "Plus" Außen, "Minus" Innen (Netzteil ist nicht im Lieferumfang enthalten). - Abmessungen (LxBxH): 115mm x 70mm x 48mm
- Gewicht: 240g
- Handmade in Germany
